Smart adhesive patch sticks securely and releases gently without damaging skin

by Pohang University of Science and Technology

edited by Sadie Harley, reviewed by Robert Egan

Sadie Harley

Scientific Editor

Meet our editorial team
Behind our editorial process

Robert Egan

Senior Editor

Meet our editorial team
Behind our editorial process Editors' notes

This article has been reviewed according to Science X's editorial process and policies. Editors have highlighted the following attributes while ensuring the content's credibility:

fact-checked

peer-reviewed publication

trusted source

proofread

The GIST Add to Preferred Sources

Most people remember the sharp sting of removing a bandage from the knee. For people with fragile skin, however, this moment can be more than brief discomfort. In neonates, older adults and critically ill patients, repeated attachment and removal of medical adhesives can cause irritation, epidermal damage and even skin stripping.

A research team led by Professors Jin-Tae Kim and Seok Kim in the Department of Mechanical Engineering at POSTECH, with integrated MS-Ph.D. students Uhyeon Kim and Hyein Jung, together with Professor Chang-Hee Son at Texas Tech University, has developed a medical adhesive patch that attaches securely during use but can be removed with markedly reduced force when needed.

The work was conducted in collaboration with Professor John A. Rogers at Northwestern University and was published in Nature Communications.

Strong adhesion can damage fragile skin

Skin-mounted medical monitoring devices, including sensors that measure cardiac activity, respiration and motion, must remain stably attached to the body to acquire reliable physiological signals.

Conventional medical adhesives have therefore been designed primarily to maximize adhesion. The challenge arises during removal. Strong adhesion can generate large peeling forces and stress concentrations at the skin surface, which may lead to medical adhesive-related skin injury (MARSI), particularly in patients with vulnerable or repeatedly contacted skin.

Heat restores microscopic pyramids

The research team addressed this problem using a shape memory polymer (SMP), a material that can recover a programmed shape when exposed to a specific temperature. The surface of the adhesive patch was engineered with an array of pyramidal structures. In the dormant state, these pyramids are flattened, allowing the adhesive to make broad contact with the skin and maintain stable attachment.

Upon mild heating above the glass transition temperature, the pyramids recover their original geometry. This recovery reduces the effective contact area at the skin-adhesive interface, creating interfacial gaps and allowing the patch to detach with substantially lower force.

Experimental results showed that thermal activation reduced adhesion energy by up to approximately 99%, while the adhesive maintained stable attachment during use. Using three-dimensional digital image correlation (3D-DIC), the team also visualized deformation beneath the skin surface during detachment.

Compared with the dormant state, the activated SMP adhesive markedly reduced peel force and suppressed subsurface skin deformation in both a skin phantom and human skin.

Flexible design supports wireless sensing

To improve wearability on curved body regions, the team further introduced a kirigami-inspired structure into the adhesive. This design enhanced mechanical conformability on curved areas such as joints and improved moisture transport through the adhesive layer.

The adhesive was also integrated with wireless mechano-acoustic sensing devices, demonstrating stable biosignal acquisition during normal attachment and controlled detachment after thermal activation.

Gentler removal for repeated monitoring

This technology may be particularly useful in clinical settings where sensors must be repeatedly attached and removed, such as neonatal intensive care units, geriatric wards and long-term patient monitoring. By reducing mechanical loading during removal, the adhesive could help lower the risk of skin irritation and injury while preserving reliable device performance.

"This work is meaningful because it controls the mechanical forces at the skin-device interface, rather than simply changing the adhesive material itself," said Professor Jin-Tae Kim. "By combining stable attachment with low-force removal, the platform offers a practical route toward safer skin-interfaced biomedical devices."

Professor Seok Kim explained, "What sets this apart from existing medical adhesive technologies is that it actively switches the adhesive properties by utilizing the microstructure of shape-memory polymers, allowing it to adhere firmly during use and be easily removed when needed."

Son added, "Because this approach enables both reliable adhesion and gentle detachment, it can be extended toward a broader class of technologies in which adhesion needs to be actively controlled on demand."

Publication details

ChangHee Son et al., Shape memory polymer adhesives for on-demand, low-force detachment in skin-interfaced devices, Nature Communications (2026). DOI: 10.1038/s41467-026-76622-0

Journal information: Nature Communications

Clinical categories

Dermatology Provided by Pohang University of Science and Technology Who's behind this story?

Sadie Harley

BSc Life Sciences & Ecology. Microbiology lab background with pharmaceutical news experience in oil, gas, and renewable industries. Full profile →

Robert Egan

Bachelor's in mathematical biology, Master's in creative writing. Well-traveled with unique perspectives on science and language. Full profile →

Citation: Smart adhesive patch sticks securely and releases gently without damaging skin (2026, October 22) retrieved 22 October 2026 from https://medicalxpress.com/news/2026-10-smart-adhesive-patch-gently-skin.html This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.