Proposing simple measures to prevent industry dumping plastic pellets into the sea

Lisa Lock

scientific editor

Meet our editorial team
Behind our editorial process

Robert Egan

associate editor

Meet our editorial team
Behind our editorial process
Editors' notes

This article has been reviewed according to Science X's editorial process and policies. Editors have highlighted the following attributes while ensuring the content's credibility:

fact-checked

trusted source

proofread

The GIST
Add as preferred source

The presence of small plastic pellets on the beaches of Donostia and Orio has drawn attention to a little-studied source of pollution: leakage of industrial microplastics that reach the sea through stormwater drainage networks. Researchers in the Materials + Technologies Group at the EHU have identified two control parameters that would enable early detection of these losses to be made, and have proposed containment measures that can be easily incorporated into discharge regulations.

Every year, 1.7 million tons of plastic end up in the marine environment as waste. Due to their slow natural degradation, plastics accumulate in seas and oceans at a rate the long-term consequences of which remain uncertain. Microplastics (less than 5 mm in size) are a cause of great concern due to their ubiquity and their ability to enter the food chain. The Materials + Technologies Group (GMT) of the EHU-University of the Basque Country has focused its attention on microplastics of industrial origin.

As part of the ItsasMikro project, the group observed "a significant presence of plastic pellets on the beaches of Donostia and Orio" over a two-year period. These are small plastic particles, about 2 or 3 mm in size, used in the manufacture of plastic products, which, "due to leaks, spills or industrial discharges, may end up in the sea through stormwater drains," said Dra. Amaia Mendoza, the group's researcher and lecturer. "The problem lies in the volume of rainwater that washes over the pavement of the facilities, because that is where a large proportion of these losses occur."

"Until now, most of the analysis has concentrated on the marine origin of microplastics (from fishing nets, the disintegration of larger plastic objects that have been poorly managed, etc.). What is more, there is now increasing talk of microplastics originating in agriculture. However, there is a considerable lack of knowledge about the contribution to microplastic pollution from industries, for example, from their use as raw materials or from materials used in construction such as thermal insulation," explained Mendoza.

Early warning sign

Out of all the standard parameters used in stormwater discharge controls by water quality control authorities, the GMT group identified two: "Suspended solids and volatile suspended solids can provide an early warning sign in the event of a leak of pellets or any other type of industrial microplastic, such as textile fibers, microspheres, etc."

The European Commission has recently approved (November 2025) an initial regulation to control this type of pellet pollution, which covers both the handling and transport of plastic pellets and, above all, obliges the largest plastic handling companies to take measures to contain this type of material. However, the researcher pointed out that "although this is an important first step, it does not go any further. Currently, there are no official, internationally accepted standardized analysis parameters. Furthermore, other types of microplastics that originate in industry are not included."

So the two parameters identified by the EHU group could easily be incorporated into the discharge authorizations for the plastics industry. "If, in the first instance, an analysis of these parameters yields values higher than the reference levels in stormwater, it would be necessary to check in the second instance whether pellets are actually present or not," she explained. Monitoring these parameters at discharge control points within the plastic industry's stormwater networks "represents a technically, economically and environmentally advantageous strategy for preventing pellet spills, she added.

Discover the latest in science, tech, and space with over 100,000 subscribers who rely on Phys.org for daily insights. Sign up for our free newsletter and get updates on breakthroughs, innovations, and research that matter—daily or weekly.

Subscribe

Containment measures

The EHU's Materials + Technologies Group proposes a number of measures to contain this type of leakage, including the use of underground tanks: "Just as some facilities use underground tanks to contain and separate hydrocarbon leaks, industries that are potential sources of microplastics could use specially adapted underground tanks so that spilled microplastics can be separated by flotation."

Mendoza insists that these are "tangible measures and tools" to curb a major problem: "These are measures and tools that are already being used in discharge regulations. They can be easily and economically incorporated into industries that are potential sources of microplastics. They would just need to be taken into account when issuing a waste discharge authorization for this type of industry."

The GMT researcher also pointed out that "this can be extended to other types of industrial microplastics, such as those released by textile companies that use synthetic fibers, or microspheres used in industries, such as cosmetics," and stressed the need to continue investigating the industrial origin of microplastics that invade the marine environment.

Key concepts

microplastic contaminationsuspended material (water)industrial water userunoff

Provided by University of the Basque Country