A clever hack fixes the new Mac mini power button's awkward location
by William Gallagher · AppleInsiderFollowing the news that the New Mac mini has its power button on the underside, fans with 3D printers have been proposing how to make it more accessible.
The first of what just might become a wave of Mac minipower button tools have begun to spread across social media, but maybe the archetype of them all is from engineer Ivan Kuleshov. He previously redesigned the Magic Mouse so that it got a charging port on the front.
Kuleshov's idea is a clever fulcrum where pressing on one end causes the other to rise, and therefore press the comparatively inaccessible power button. He's even 3D printed it with an Apple-style power icon on the end.
There is of course the small problem that Kuleshov does not have a new Mac mini. They're available for pre-order now, but won't ship until November 8, 2024.
Consequently, Kuleshov says he "modeled the Mac mini based on available photos and dimensions," and that believes his lever will work. But he notes that ultimately it will depend on "the Mac mini weight and the force required to press the button."
But then there is a further snag that isn't going to be fixed by Kuleshov's lever design. His lever has to extend out from one side of the new Mac mini, meaning that despite its small size, it takes up a larger footprint on a desk.
If you're the sort who leaves their Mac on all the time, then you won't be concerned about the power button. And you're also not concerned about the planet.
Macs can restart themselves after a power outage, so there are use cases where that inconvenient power button might only be pressed once. In that case, it can pressed as you first put the Mac mini down on your desk.
But whenever you do need to press that button, you have to pull up the Mac to reach it. Depending on the space you have, and depending on how many cables you have connected, that could be a pain.
It does, though, hark back to the days of Steve Jobs who famously did not like having power buttons at all.
That didn't stop Apple putting one on every Mac mini, starting right back with the original in 2005. From then until now, the power button was on the back — so it could have been more accessible even then.
42 Comments
🎃
beowulfschmidt 2330 comments · 12 Years
About 14 hours ago
Just turn the Mini upside down.
No, it's not a serious suggestion.
👻
aestival 76 comments · 19 Years
About 14 hours ago
The best solution is to put it on top of your Firewire CD burner while playing Hurt by Nine Inch Nails. Personally I'm furious that it doesn't include an interface for my typewriter.
🪦
mrstep 522 comments · 15 Years
About 14 hours ago
> If you're the sort who leaves their Mac on all the time, then you won't be concerned about the power button. And you're also not concerned about the planet.
if you really care about the planet, you longingly gaze at your unpowered Mac mini when stepping out of the commune-tent to eat a bug snack. Otherwise you're just an eco-poser..
🧟
jvm156 32 comments · New User
About 14 hours ago
I don't even see how this is an issue. ya already have to reach around these things to get at the power button. what's the difference if its underneath a little
🧟
rob53 3298 comments · 13 Years
About 14 hours ago
Every Mac can go into a low-power mode, allowing it to receive things from the web. Leaving any Mac on is actually better than power cycling it every time you use it. Startup requires a lot of energy and is something only casual users do. They aren't turning their Macs off to save energy, they're turning them off because that's how you used to do it back in the Intel days.
As for the button being on the bottom, that's actually a stupid move for Apple. When these go into server racks, and they will go there immediately after the M4 Mac mini Pro is released, data centers will complain. Sure they will only turn them on once but they will need the easy ability to manually power cycle them when needed.