The iFootage Shark Slider Nano II Integrates DJI Ronin S Gimbals

iFootage announced a Shark Slider developed in conjunction with DJI that completely overhauls the previous design. The Shark Slider Nano II integrates the DJI Ronin S series of gimbals into a seamless tracking workflow and can be controlled via a touch screen or a smartphone app, allowing quick and easy operational synchronization of both the gimbal and the slider.

The iFootage Shark Slider Nano II enables simultaneous gimbal movement, providing cinematic fluidity for filmmaking. It provides smooth multi-dimensional movements,such as panning and tilting, with minimal setup and intuitive control. The entire system is powered by a single USB-C PD 3.0 charging port that uses a 60W charger. Through this one port, the cable can power the slider, the stabilizer, and the camera.

A significant enhancement in the tracking system is the incorporation of a linear bearing, ensuring smoother and more stable operations. Unlike its predecessor, which only featured two key points (A and B), the Nano II supports up to eight key points, offering more versatility in setting up complex shots. Additionally, the system is equipped with AI facial tracking, making it perfect for applications like cooking shows where dynamic and engaging shots are crucial. Imagine capturing an epic scene as you chop vegetables in a bustling kitchen, all while maintaining an incredibly quiet operation thanks to the new linear bearings.

“Powered by advanced AI, the Nano II recognizes faces and tracks objects. When using the slider alone, it supports dual-axis horizontal tracking and when linking with DJI stabilizers, it enables full-range smart tracking with five-axis coordination —pan, tilt, and roll— for clear and stable shots every time,” iFootage says.

Because it was co-developed with DJI, the Shark Slider Nano II offers seamless five-axis linkage when paired with DJI stabilizers like the RS2, RS3 Pro, RS4, and RS4 Pro. Enjoy smooth control over pan, roll, and tilt axes with precise wired connections. iFootage says that the DJI adapter mount reduces center-of-gravity shift and provides solid support and smooth communication for zero-delay control.

The Nano II comes in two versions: a long 663 x 133 x 99mm option with a 40cm (15.7 inch) travel range and a shorter 463 x 133 x 99mm system with a 20cm (7.9 inch) travel range. Both provide a horizontal payload of seven kilograms and a vertical pauload of 3.5 kilograms.

Both models continue to support the popular NPF Sony battery and with a new Neo battery grip add-on accessory, iFootage promises incredibly long-lasting performance that can, as mentioned, serve as an all-in-one power solution when connected with a single USB-C cable. Of note, any properly powered USB-C power banks can be used to power the device.

Boasting a top speed of 45mm per second, iFootage says the Nano delivers rapid and precise motion. Its carbon tube construction minimizes vibrations and addresses sagging problems during operation. Additionally, the adjustable support feet at the base allow for an 8mm fine height adjustment, ensuring stability even on uneven surfaces.

the iFootage Nano II is relatively inexpensive for what it offers, starting at $749 for the long version and $649 for the short version. The battery grip will be available for $119. The new Nano II will be available starting by the “end of November.”

Image credits: iFootage