The fastest robot to be made entirely of soft materials can reach speeds of up to 4.72 meters – a little more than 5 yards – per second, engineers at the University of California San Diego have shown. The six-legged robot can run on a wide range of terrain, from sand, to mulch, to concrete. It can also swim in water and walk underwater. The robot, designed, built and tested at the UC San Diego Jacobs School of Engineering, is 3D-printed in one go using only one material and doesn’t need electronics to function. Credit David Baillot/University of California San Diego

UC San Diego engineers 3D-print record-breaking, electronics-free soft robot

by · Open Access Government

Engineers at UC San Diego have built the fastest entirely soft, electronics-free robot on record, a single-piece, 3D-printed six-legged machine powered by a compound steam-engine pneumatic design that sprints over five yards per second

Published in the November 18, 2026, issue of Science Robotics, the six-legged machine is fabricated in a single, monolithic 3D-printing pass from one flexible material. Powered solely by compressed air, the robot surpasses its 2022 predecessor by more than 100-fold while navigating rugged terrain, descending stairs, swimming, and walking underwater.

Compound pneumatic architecture and mechanical control

Early pneumatic soft robots suffered from severe speed and efficiency bottlenecks: increasing air pressure to move faster caused high-pressure air to exhaust prematurely before its mechanical energy could be harvested. Postdoctoral researcher Dr. Yichen Zhai and Professor Michael T. Tolley solved this limitation by adapting the nineteenth-century compound steam engine into a soft, monolithic fluidic circuit:

  • Two-stage pressure expansion:

    • Internal chambers, tubes, and valves force compressed air to circulate twice through the robot’s body—first entering smaller, high-pressure chambers to actuate internal pneumatic logic valves, and subsequently expanding into larger, low-pressure chambers to drive the six legs.
  • Zero-electronics autonomy:

    • By embedding mechanical fluidic logic directly into the 3D-printed geometry, the robot achieves rhythmic, high-speed locomotion without microcontrollers, batteries, or wiring.
  • All-terrain and amphibious versatility:

    • Field testing demonstrated seamless locomotion across concrete, gravel, grass, mulch, and loose sand, alongside the ability to descend stairs, swim at the water’s surface, and walk fully submerged.

Future scalability and extreme-environment deployment

While the current prototype requires a tether to an external air compressor, the researchers are working to reduce air consumption so future versions can operate untethered using compact, onboard compressed-gas cartridges, alongside adding fluidic steering and object manipulation capabilities.

Because the robot contains zero vulnerable circuitry, this desktop-printable architecture opens critical operational pathways in environments where conventional electronics fail:

  1. High-radiation and magnetic zones:

    • Scientific inspection and maintenance inside nuclear facilities, particle accelerators, or MRI environments.
  2. Disaster response and search:

    • Navigating flooded, debris-strewn, or explosive-risk disaster sites safely without spark hazards.
  3. Space exploration:

    • Deploying low-cost, monolithic soft rovers capable of surviving extreme temperatures and cosmic radiation on planetary surfaces.