Your old hi-fi and TV get a second life with Home Assistant’s Connect AUX-2
by https://www.facebook.com/vincentnguyen · The GadgeteerIf you buy something from a link in this article, we may earn a commission. Learn more
A good amplifier from fifteen years ago still sounds good, and it still has no idea what a streaming service is. Home Assistant’s Connect AUX-2 fixes that gap for $69, and it brings serial controlled TVs and receivers along for the ride too.
The small white box streams audio to gear you already own, controls two RS-232 devices at once, hosts a Z-Wave adapter over the network and works as a Bluetooth proxy for the rest of the house. It’s built on ESPHome, it runs locally, and it doesn’t ask your older gear to phone home to a cloud account before it’ll play a song. Four jobs ride in one enclosure, and the enclosure’s small enough to disappear behind a receiver.
Nabu Casa sells it worldwide now, and every purchase sends most of the net profit toward the Open Home Foundation and the projects behind Home Assistant, ESPHome and Music Assistant.
Home Assistant Connect AUX-2
Combined 3.5mm analog and optical S/PDIF output · Two RS-232 serial ports · PoE or USB-C power
Price: $68.95
Where to buy: Buy at CloudFree
Old speakers become streaming speakers
Plug it into an aux input and that forgotten hi-fi is a streaming speaker again.
The combo jack handles analog and optical digital output through one 3.5mm port, and it senses which cable you’ve plugged in and switches on its own. Analog runs through a TI PCM5122 DAC at 24-bit/48kHz stereo, and the digital side passes stereo PCM through untouched for an external DAC to handle.
Music Assistant finds the AUX-2 on its own. It treats the box as a Sendspin player, right alongside your streaming services.
Sendspin handles the sync side, and it’s an open standard, so an AUX-2 in the kitchen can play alongside smart speakers from other brands instead of asking you to pick one ecosystem and stick with it. Multiple AUX-2 units group together the same way. Local FLAC, MP3 and WAV files join the same library.
There are limits worth knowing before you order one for the stereo in the den. The AUX-2 only plays audio out, so a turntable or CD player can’t send music through it to other rooms, and Bluetooth audio isn’t part of the deal at all. It doesn’t amplify anything either, so passive speakers still need an amp between the box and the drivers.
Serial control puts TVs and receivers on your terms
Two 3.5mm RS-232 ports sit next to the audio jack. Each one talks to a TV, a receiver or a projector that has a serial port and a Home Assistant integration. Power, volume and input switching come along, and the gear still answers from standby.
That changes how an older TV fits into the house.
Cut the TV off from the internet and it can’t phone home. Home Assistant still runs it over the serial cable. That’s the trade a lot of owners have wanted for years, and the same ports reach past the living room too, into UPS units, climate gear and solar inverters that speak serial.
TX and RX swap switches sit on the underside, and they save a cable that arrived wired the other way around. Flip the switch for that port and the lines trade places, so a bargain serial lead still works instead of going back in the drawer.
Cables are on you, though. The box ships without audio or serial leads, and some gear needs a converter cable for DB9 or RJ11 ends first.
Z-Wave placement, Bluetooth reach and PoE in one small box
The USB-A port hosts a Connect ZWA-2, which moves your Z-Wave network into the room where the signal needs to be.
Bluetooth gets its own dedicated antenna, and the AUX-2 starts finding nearby Bluetooth devices as soon as it’s added. Add a few more units and that reach extends room by room, which helps sensors stuck in far corners of the house report in reliably and on time.
Spread a few around a larger home and Bluetooth coverage stops depending on wherever the main system happens to sit. Each one covers its own patch of floor, and devices check in with the unit closest to them. Sensors in a back bedroom stop dropping off the network at night.
Power runs two ways. A 5V USB-C supply of 2A or more covers a normal shelf setup, or Power over Ethernet on an 802.3af switch feeds the box through the network cable itself, one source at a time. Wi-Fi covers homes without a cable run nearby, though a wired link is the steadier choice for an adapter doing Z-Wave duty across the house. One Ethernet cable can carry both power and data to the pair.
A Grove port takes I2C and GPIO sensors, so a cheap temperature sensor can ride along in a rack and report back through the same box. The bootloader’s unlocked too, and the firmware’s built on ESPHome, so custom builds flash without a fight.
Setup needs a Home Assistant system running 2026.9 or later, and the box joins through the ESPHome integration. The enclosure’s polycarbonate, white and semi-transparent, at 106 by 63 by 25mm and 104 grams. Four Phillips screws hold the case together, and Nabu Casa plans to release the PCB and 3D print files for modders.
At $68.95 at CloudFree, with a $69 recommended price from Nabu Casa, the AUX-2 asks less than a replacement streamer and gives the gear you own a longer run. If your hi-fi still sounds right, keep it. If your TV still has a serial port, this box brings both back into the house system. That’s a longer life for gear that was headed for a closet.
Home Assistant Connect AUX-2
ESPHome firmware with an unlocked bootloader · Grove port for I2C and GPIO sensors
Price: $68.95
Where to buy: Buy at CloudFree
Love our content? Sign up for our newsletter today. No ads, no spam, just links to our latest articles!