7 Knife and EDC Picks That Pull Their Weight This Friday
· The GadgeteerIf you buy something from a link in this article, we may earn a commission. Learn more
Friday’s knife desk ran from a $32.99 D2 folder to a $300 American-made balisong, and the middle of the range held up just as well as either end. One folder changes color in a warm hand.
Every pick below ran on Gadgeteer today, and each section links the full piece for readers who want the deeper read before they spend.
1. CJRB Pyrite-Light Thermochromic
The Pyrite-Light Thermochromic leads today’s Japanese knife wave with a pigment that answers to temperature, so the scales shift color as the knife warms in a hand or cools in a pocket.
Dark green fades toward light green.
Under the color show sits familiar hardware, a 3.34-inch AR-RPM9 wharncliffe on a button lock, spinning on a ceramic ball-bearing pivot, and the whole knife weighs 2.47 ounces. Buy it at $39.99 for the color shift. The standard Pyrite-Light underneath sells at $29.99 and cuts exactly the same.
CJRB Pyrite-Light Thermochromic
3.34-inch AR-RPM9 wharncliffe · Button lock on a ceramic ball-bearing pivot · Thermochromic FRN handle, 2.47 oz
Price: $39.99 $53.32 (save $13.33, 25% off)
Where to buy: Buy on Amazon
2. CRKT M16-02KBALI Balisong
Kit Carson’s M16 went butterfly for this one, and the all-black M16-02KBALI keeps the angular tanto profile while the folding mechanism gives way to two rotating handles. It weighs 2.6 ounces.
At $300 it asks balisong money, and the MagnaCut blade plus the American build make the case for the right carrier. Live Sharp Industries builds the knife in Colorado. A 3.37-inch MagnaCut tanto wears an oxide finish over black aluminum handles, and a removable pocket clip finishes the carry side.
CRKT M16-02KBALI Balisong
3.37-inch MagnaCut tanto with an oxide finish · IKBS ball-bearing pivots · Black aluminum handles, 2.6 oz, built in Colorado · Kit Carson design with a removable pocket clip
Price: $300
Where to buy: Buy at CRKT
3. Böker Advent Calendar 2026 Gent
The Böker Advent Calendar 2026 Gent hides a complete pocket knife kit behind 24 doors, one part at a time through December, and the finished folder runs a two-hand backlock with a nail nick.
Nothing arrives assembled.
The calendar only works if the box lands before December 1, so the $235 price carries a deadline the other picks on this list don’t. Blades, handle scales, and screws land one stage at a time, with a step-by-step manual and a YouTube guide carrying the build, so the gift asks for patience instead of a thank-you and a shelf.
Böker Plus Advent Calendar 2026 Gent
24-door DIY kit on the Böker Plus Gent · Two-hand opening, nail nick, backlock · Step-by-step manual and YouTube guide included
Price: $235
Where to buy: Buy on Amazon
4. Morakniv Garberg
The Morakniv Garberg answers every snapped stick tang with a full-tang build, a 4.3-inch carbon steel blade ground scandi at 3.2 millimeters thick, and a squared spine built to strike a ferro rod.
The steel runs end to end.
At $99.99 with the polymer sheath, it’s the bushcraft pick from today’s guide for anyone heading out this weekend. The diamond texture locks into a gloved hand. The carbon blade takes a patina if it sits wet in the polymer sheath, so it wants a wipe down after wet work.
Morakniv Garberg, carbon steel, polymer sheath
4.3-inch carbon blade, scandi grind, full tang · Ground 90-degree spine · Diamond-texture handle that locks into a gloved hand · Made in Sweden
Price: $99.99
Where to buy: Buy on Amazon
5. Leatherman Skeletool CX
The Leatherman Skeletool CX takes the pocket slot in today’s Leatherman guide, trimming the tool count to seven and the weight to 5 ounces, then spending the savings on a 154CM blade at 58-60 HRC.
Pliers, wire cutters, and a bit driver cover the work.
A carabiner opens bottles, spare bits store inside the handles, and the 420 stainless frame closes to 4 inches and clips to a pocket like a folding knife. Buy it at $79.95 if the knife leads the carry and the pliers ride as backup, because that priority shapes the whole design.
Leatherman Skeletool CX
7 tools · 5 oz · 154CM blade
Price: $79.95 $99.95 (save $20.00, 20% off)
Where to buy: Buy on Amazon
6. NedFoss Mermaid
NedFoss built the Mermaid around length, a 3.9-inch D2 blade with a titanium carbo-nitride coating, which gives this group its longest cutting edge and a wear-resistant steel at a budget price.
It still rides slim.
The discount is a plain $3 off. Buy the Mermaid at $32.99 for the blade length and the steel, not the size of the cut. A flipper on a brass-bearing pivot opens the blade. A liner lock secures it, the textured G10 handle gives the palm its grip, and a deep-carry clip drops the knife low inside a pocket.
NedFoss Mermaid
3.9-inch D2 blade with a titanium carbo-nitride coating · Flipper on a brass-bearing pivot, liner lock · Textured G10 handle with a deep-carry clip
Price: $32.99 $35.99 (save $3.00, 8% off)
Where to buy: Buy on Amazon
7. RovyVon S3
The RovyVon S3 closes the list as the non-knife pick, a triple-LED pocket light in a 69.6-millimeter aluminum body that puts out 1,800 lumens on its cool-white setting.
A deep-carry clip carries it.
Turbo steps down to 500 lumens after three minutes. A body this small trades runtime at max for carry size, and the neutral-white set answers with 1,200 lumens and cleaner color for close work.
The box below carries the black S3 at $33.95 on Amazon, and the orange version runs $34.95 direct from RovyVon for anyone set on the color.
RovyVon S3 EDC Flashlight, Cool White, Black
1,800 lumens from three LEDs · 69.6 mm aluminum body at 78 g with battery and clip · USB-C charging, runs on a 16340 cell or a CR123 · Deep-carry clip with a tripod hole
Price: $33.95 $36.99 (save $3.04, 8% off)
Where to buy: Buy on Amazon
Love our content? Sign up for our newsletter today. No ads, no spam, just links to our latest articles!